|
|
930L and 930LD Lightbars
LED and LED/Digital Lightbar Series
The 930L and 930LD series lightbars combine revolutionary optical design with state-of-the-art LED technology to provide the most powerful emergency warning systems available. These lightbars offer fully integrated multi-level warning capabilities with unprecedented control flexibility. The 930L uses a traditional multi-wire cable to interface with virtually any controller or switch box. The 930LD lightbar is equipped with a digital control cable utilizing a standard RJ45 interface which connects to a TOMAR 940L-DCP & Siren.
 |
Features |
 |
- Multiple user selectable flash patterns.
- Multi-level warning, LED modules operate in ALL ON, LEFT/RIGHT, or TOP/BOTTOM patterns depending on module selection.
- Lower level Traffic Director can be operated independently in LEFT, RIGHT or CENTER OUT patterns or be synced to flash with or alternate with upper level.
- Input 12-28 Vdc, draws only 5 amps (48" bar with 14 led modules).
- Meets SAE J 845 requirements, NFPA and J2498 packages available.
- Mounting hardware includes (permanent or hook-on).
- Clear lenses are standard, colored lenses can be ordered on single color LED modules. Multi colored LED modules must use clear lenses. See all configurations and available colors
- 5 year warranty on LED modules and LED controllers.
- Available sizes: 17", 24", 32", 40", 48", 56", 64", 72", 80", 88", 96".
|
|
Lightbar Options |
|
- Lower Level Traffic Director
- 54 or 74 Watt Takedown Light
- LED Takedown Light
- Split 35 Watt Takedown Lights
- 35 Watt Alley Light
- STROBECOM II Preemption
- Rear Stop/Turn/Tail Light
|
|
Specifications |
|
| Item |
Description |
| Electrical |
12-28VDC operation
5 Amp average (48" bar 14 LED modules) |
| Size |
Height: 4.75" (120.6 mm)
Width: 11.5" (292 mm)
Length: varies on lightbar |
| Weight |
39 lbs. (17.7 kg) |
| Operating Temperature Range |
-50°C to +85°C |
Mounting Hardware (included)
All TOMAR lightbars may be permanently mounted (no hook required) or hook-on mounted. All permanent mounted lightbars use the UNPK permanent mount kit. All hook-on mounted lightbars use the UNHK mounting bracket plus a hook kit. Please see Mounting Hardware Reference Guide IS0056 to determine the part number of the hook kit needed.
|
|
